Dayton Wheel Conversion - forums

I have looked at the offerings by accuride but the recommended.

My question is, how much trouble and at what cost am i looking at to change them over to budds.

Tubetype 20″ dayton wheels can be replaced by 22. 5 tubeless dayton wheels without changing any of the mounting hardware & using the same hub.

This same conversion works for 15″.

If you took the.

What do i need to make this work?

Balancing a dayton rim is impossible around the kansas city area using a spin balancing machine.

Does anyone know what the options are for converting the hubs on a older chevy medium duty to modern 22. 5 wheels?

Hey all, i am new to this forum but am a diesel mechanic by trade and a driver by choice.

You have a gunite hub look here and you will find a conversion request from gunite at the bottom of the page.

You need 8. 25x22. 5 wheel for 11r22. 5.

Do you have an old trailer with dayton style (mobile home) hubs?

Dayton wheel to 10 lug conversion.

I was blowing tires out every time i used this trailer!

I just picked up a set of 8. 25x22. 5 rims and will be mounting 11rx22. 5's.

If you don't mind keeping the dayton wheels it's cheap and easy to go to 11r or low pro 22. 5.

I have a 1986 international s1600 with 9x20's right now.

I acquired a '87 ford l8000 that is in really nice shape except that i hate the looks and.

There is alot more to converting hubs than just the bearings.

Hello gents, i have a 92 ih bus with 22. 5 dayton wheels.

10x20 tires still available here but i just changed to tubeless.

I have bought a 1984 b60 chevy bus that has dayton style wheels on it with 9. 00 20's and want to swap to 10 r22. 5 tires since the 20's are unobtainum anymore.

After 10 years, i decided to upgrade.

Apparently you can use this center section on.

📸 Image Gallery

This same conversion works for 15″ tubetype going to 17. 5″ tubeless & 22″ tubetype going to 24. 5″ tubeless.

11r22. 5 is direct replacement for 10. 00r20.

After researching the possible issues with the dayton style wheels, i have decided that for my peace of mind, i will change out the hubs, wheels and brakes (brakes only on one.

I can't seem to locate a suitable wheel based on a modern conversion.

Idk that tires will be.

Buy a bus with budd wheels and air brakes, and swap in your stick shift if you like.

I'd like to switch to a 22. 5 setup when it comes time to get tires.

Those have an inner wheel a spacer ring and an outer wheel.

You can upgrade your tire/rim combo to a 22. 5 single piece rim very easily.

If i'm understanding what you want to do correctly you can just take the inside tire off the wheel.

Tubetype 20″ dayton wheels can be replaced by 22. 5 tubeless dayton wheels without changing any of the mounting hardware & using the same hub.

I'm looking to replace both the drives & steering.

No one has the adapters to mount the tire on a spin balancer.

You can still get new dayton rims in the 22. 5 size for about 150 a piece, or you can find set of used.